miniVAP Vaporizer Cleaning Guide

The only parts that should get dirty are the baskets, oil pads, screens and flexicones all of which can be...

miniVAP Vaporizer Cleaning Guide

Cleaning the miniVAP is easy.  If you use the direct pack method, there is one extra step for you.

ISO Soak

The only parts that should get dirty are the mouthpiece, baskets, oil pads, screens and flexicones all of which can be cleaned by soaking for thirty minutes in high percentage isopropyl alcohol (ISO). 91% or higher is best.

We like to throw all the parts in a small glass dish and enough ISO in to just cover, agitating every now and then.

miniVAP Vaporizer Parts to Soak - Planet of the Vapes

Rinse & Dry

Rinse all the parts thoroughly in warm water and let them all dry completely before using again.  If you still smell some ISO rinse and dry again.

If you direct pack

If you use the direct pack method, the heating chamber can be cleaned by rubbing it with a cotton swab dipped in ISO. Be sure to not let any ISO drip down into the heater. Holding it upside down while cleaning can help here.

Vape discussion

Previous

Our First Look at the Boundless CFC Light!

The Boundless CFC Light First Look - their smallest and least expensive vaporizer yet!

Next

Ghost MV1 Tips and Tricks

The Ghost MV1 comes with a bit of a learning curve, and our tips and tricks can help ease it....