The Vapman Click dry herb vaporizer is one of the best vaporizers to pull you in closer to your herbal blends and vaping experience. Join us as we explore each step of this mindful session.
Vapman quickstart guide: quick summary
- Set the flame
- Grind your herbs
- Load the oven
- Heat it
- Hit it
- Cleanup
What’s in the box
- 1 x Vapman Click Vaporizer
- 1 x Travel case
The Vapman and its components
The small and discreet Vapman Click splits apart into two main components, the bowl and the stem/lid. Unlock the stem with a counter-clockwise twist and remove it to reveal the bowl/heating chamber below. On the underside of the bowl, you’ll see the heating point where you point the torch flame and cook your herbs. The stem has an airflow slit to adjust the airflow as needed (twist the mouthpiece insert to close and open the airflow). Now, let’s get started with a session.
Set the flame
For this first time, set the flame of your torch lighter to the diameter of the metal filter on the bottom of the stem. The aura of the flame should extend to or just a little past it. Twist the flame adjuster underneath the lighter to fine tune it. Turn it clockwise to lower it, counterclockwise to increase it. It doesn’t have to be exact. Around there is a good place to start.
Use a medium-fine grind
The Vapman vaporizer prefers a medium-fine grind, so take whatever grinder you have and grind some herbs up. Most three or four-piece grinders will work fine, but if you have a two piece grinder, just grind until there’s little resistance when you twist and turn.
Pack and lock
Remove the stem and sprinkle your herbs into the bowl and fill it just below the rim. Place the mouthpiece on top, press it in until the little rod of the bowl inserts into the stem, and and twist to lock it into place.
Heat it and hit it
To start, place the tip of the flame on the bottom of the bowl and heat it up until you hear a ‘click’. This can take anywhere from 10 to 15 seconds. Then, take a slow and steady hit of a few seconds. You may or may not get any visible vapor on this first hit, but it’ll ramp up with more heat ups. Jump right back in after it ‘clicks’ out again.
Tip: Heat it a few seconds past the ‘click’ for thicker hits.
Stir if needed
After a hit or two, open the oven and check the herbs. If they’re a dark brown color, they’re spent and you can toss them. If it’s on the lighter side, use the metal rods on the side of the stem to stir it and give it another good hit. Most conduction vaporizers, like the PAX 3 or Davinci IQ2, don’t need to be stirred, but the Vapman will do well with one sometime during your session.
Cleanup with a brush and wipe
After each session, empty the bowl, brush it out, and wipe down the mouthpiece screen below the vapor path. And that’s it!
Find your sweet spot
The beauty of the Vapman portable vaporizer is its unique flexibility. It has a bit of a learning curve, but it serves you. You can heat it to or before the 'click' for gentle, flavorful hits, or push past it for you big hitters. Play around with different torch settings and heat methods to dial in your own specific sessions and vapor quality.
